Surfboard Painting Day 2

 Day 2


Day two started off much smoother than day one. I began by drawing out a small outline of what I wanted to paint on the board. I then outlined the drawing on the board in pencil. I worked on this portion of the project for roughly three hours. After I finished outlining, I worked with paint pens and an airbrush to begin the physical painting. I finished the first two-thirds of the painting after lunch and called it a day at 3:00 PM, and went to practice. This day went much quicker than day one due to the less monotonous work I was doing. I feel happy with how my project is going so far and plan to finish this board tomorrow and clear-coat it Thursday.

Comments

Post a Comment

Popular posts from this blog

Week Two Reflection

 This week was without issue. I had locked down my process the previous week, allowing for a much more seamless creation time and a lot less blunders. After a talk with Josh Norris and a trip to the hardware store, I fixed my clearcoat issue and picked up a new environmentally safe-epoxy. I also managed to fix old issues on my first project and removed many of the bubbles the old clearcoat had left.  I started off the week beginning my first skateboard project. I primed the board and finished painting in only two days. I then spent the following two days using my new clear coat and reattaching the wheels and trucks to the board. The only issue I had this week was having to remove copious amounts of rust and grime from the bearings of the wheels. Other than that the week was without issue. Looking back on this project as the senior term comes to a close, I am very happy with how it went. I feel as though I chose a healthy workload and did not over-pressure myself with lofty expectations
Read more

Week One Summary

      Week one went remarkably well. I started this project with low expectations. Most of my previous large-scale customs had gone poorly and had cosmetic issues either caused by my airbrush having issues or other paint pens or spray paint cans failing and causing blotches. I took several preventative measures before starting this project in hopes that this wouldn't happen and it went off almost without a hitch. The only problem I encountered with this entire project was with the clear coat bubbling and that was a fairly simple fix.     I am super happy with how the longboard came out as it was by far the largest custom I have ever done. The paint stuck beautifully, the primer was flawless, and the drawing came out exactly the same as my original sketch. The clear coat was definitely a disappointment but cosmetically the board is fine. I may use this piece as wall art as opposed to a functional surfboard simply due to the fact that it may not survive contact with salt water but ne
Read more

Project Prep Day

 I spent the entirety of today organizing, cleaning, and adding final details to all my projects. I plan to bring a few pieces of art that I did not start during senior project. I have a coffee table that is completely covered in doodles, tags, and paintings done by dozens of different proctor students. I plan to bring this because it reflects my artistic journey at proctor. I also plan to bring a few other skateboards, including the first deck I ever painted. I also talked with my mentor and he is going to help me set up my boards in a way that allows them to be most visible to people touring presentations. I am happy with my work on this project and look forward to showing it off.
Read more